ReadyPlanet.com
dot
bulletClamp Metal
bulletClamp Plastic
bulletBolted Metal
bulletBolted Plastic
bulletHigh Pressure
bulletSanitary FDA
bulletSanitary Hygienic
bulletFlap Valve Brahma
bulletSubmersible Stallion
bulletNatural Gas-Operated
bulletE SERIES
bulletCHEMICOR
bulletBIOCOR
bulletFUTUR
bulletAH HIGH PRESSURE
bulletCXM FOR OEM
bulletQuattroflow
bullet811 ANSI Pump
bulletE,F&G Series End Suction
bulletH Series
bulletPlunger Metering
bulletMechanical Diaphragm
bulletHydraulic Diaphragm
bulletProcess Gear Pump
bulletLubricant Gear Pumps
bulletMagnetically Coupled
bulletLiquid Ring Single Stage
bulletLiquid Ring Two Stage
bulletLiquid Ring System
bulletEngineered Solutions
bulletBooster and Piston
bulletDry Screw KDP
bulletDry Screw SDV
bulletRotary Piston KC
bulletRotary Piston KD & KDH
bulletRotary Piston KT
bulletRotary Piston KTC
bulletRotary Vane KVA
bulletVacuum Boosters KMBD
bulletPD Plus
bulletCompetitor
bulletEqualizer
bulletQx
bulletVacuum Booster MD
bulletBlower Packages
bulletPulsation Dampeners
bulletSanitary Dampener
bulletInlet Stabilizers
bulletSpill Stop
bulletAccumulators
bulletDiaphragm Seals & Valves
bulletCoolant Low Pressure
bulletCoolant High Pressure
bulletChip Lifting Pumps
bulletMiniature Centrifugal
dot
Newsletter

dot
bulletเว็บสำเร็จรูป
bulletจดโดเมนเนม
bulletลงประกาศฟรี
dot
รวมลิงค์เว็บเพื่อนบ้าน
dot


Lubricant Pump

Tuthill lubrication and circulation pumps handle many viscosities and sustain a constant flow at any pressure. With only two moving parts the internal gear design allows the pump to handle higher viscosity liquids. Simple, Compact Design offers high efficiency and longer life. Positive Reversing Action - The unique reversing feature allows the lubrication and circulation pumps the ability to reverse flow without the use of valves.



Tuthill 1000 SeriesTuthill 1000 Series

Model: 1000, 1008, 1010, 1012, 1017, 1018, 1024
1000 Series pumps are based on the proven internal gear principal, but have been enhanced in response to demands from our OEM customers for a pump that offers advanced features which make installation easier. These side-ported pumps have the option to bolt SAE/DIN flanges onto them ensuring maximum flexibility on the porting arrangements. Our goal was to design a pump that meets your technical requirements and is easily fitted into your system.

Features
• Body: EN/GJL/250
• Rotor: Carbon Steel
• Idler Gear: Sintered metal or steel
• Self Priming
• Non-pulsating flow
• Mechanical seal fitted as standard (lipseal option only on direct mounted pumps)
• Choice of ball bearing or carbon bearings in body. Carbon Bushing Idler is standard
• Max speed: 1008-1010 up to 3600 rpm and for 1012-1024 up to 1750 rpm
• Max differential pressure 18 bar (261psi) For higher pressure consult the factory
• Max inlet pressure 45 bar (653psi) Dependent on type of mechanical seal fitted
• Max temperature 200ºC (392ºF)
• Modular design for ports and bushings
• Flange has an o-ring seal

Tuthill 4000 SeriesTuthill 4100, 4300 Series

TUTHILL SERIES 4100
Series 4100 pumps have optional foot mounting, but can also be provided for close coupling and adapter mounting. They have an open-coring design which provides outstanding performance at higher speeds and pressures. The selection includes models with capacity range from 1/3 to 14 GPM. Rotor heads are hydraulically balanced for minimum end clearance assuring excellent priming and consistent capacity over a wide viscosity and pressure range. These pumps are capable of handling inlet pressures as high as 250 psi at standard 1750 rpm rotor speeds, with maximum discharge pressures to 300 psi

TUTHILL SERIES 4300
Series 4300 pumps are provided with mechanical face type seals. Ten models provide capacities from 6 to 84 GPM. Series 4300 pumps are supplied with Woodruff keyway shafts. Pumps may be provided with outboard ball bearing, relief valve and choice of Buna N, Neoprene, Viton or EPR seal. An optional mounting foot is also available

These pumps are capable of handling inlet pressures to 250 psi at standard 1750 rpm motor speeds. Maximum discharge pressure capability is 300 psi. Maximum differential pressure capability is 150 psi.

Tuthill L SeriesTuthill Model 000LE, 00LE, OLE, 1LE, 2LE, 5LE

TUTHILL LUBRICATION & CIRCULATION PUMP
Tuthill’s L series cast iron positive displacement pumps have been the industry standard for Lubrication & Circulation for over 75 years. These internal gear pumps are available with Tuthill’s unique reversing features as well as mounting, driving, and sealing options to suit all your applications.

LE Pumps
• Compact and flexible drive options
• Flow rates to 13.7 usgpm (3 m3/hr)
• Pressures to 500 psi (34.5 bar)

Application(s): Lubrication, Fluid Transfer, Filtration, Fuel Oil, Oil Burner Feed, Compressor, Refrigerators, Gear Boxes, Transmissions, Engines

Tuthill C SeriesTuthill C and CC Series

TUTHILL LUBRICATION & CIRCULATION PUMP
Tuthill’s C series cast iron positive displacement pumps have been the industry standard for Lubrication & Circulation for over 75 years. These internal gear pumps are available with Tuthill’s unique reversing features as well as mounting, driving, and sealing options to suit all your applications.

C Pumps
• Flexible mounting, sealing, and driving options
• Flow rates to 84 usgpm (19 m3/hr)
• Pressures to 250 psi (17.2 bar)

Application(s):     Lubrication, Fluid Transfer, Filtration, Lube Oil, Fuel Oil, Glycol Solutions (Anti-Freeze), Water Treatment, Polymers, Filtering Waste Oil

Tuthill 2C Stripped pumpTuthill Stripped Pumps

TUTHILL LUBRICATION & CIRCULATION PUMP

Stripped Pumps
• Partial pump assemblies built directly into OEM equipment
• Flow rates to 200 usgpm (45.4 m3/hr)
• Pressures to 150 psi (10.3 bar)

หน้า 1/1
1
[Go to top]



Copyright © 2015 All Rights Reserved.