ReadyPlanet.com
dot
bulletClamp Metal
bulletClamp Plastic
bulletBolted Metal
bulletBolted Plastic
bulletHigh Pressure
bulletSanitary FDA
bulletSanitary Hygienic
bulletFlap Valve Brahma
bulletSubmersible Stallion
bulletNatural Gas-Operated
bulletE SERIES
bulletCHEMICOR
bulletBIOCOR
bulletFUTUR
bulletAH HIGH PRESSURE
bulletCXM FOR OEM
bulletQuattroflow
bullet811 ANSI Pump
bulletE,F&G Series End Suction
bulletH Series
bulletPlunger Metering
bulletMechanical Diaphragm
bulletHydraulic Diaphragm
bulletProcess Gear Pump
bulletLubricant Gear Pumps
bulletMagnetically Coupled
bulletLiquid Ring Single Stage
bulletLiquid Ring Two Stage
bulletLiquid Ring System
bulletEngineered Solutions
bulletBooster and Piston
bulletDry Screw KDP
bulletDry Screw SDV
bulletRotary Piston KC
bulletRotary Piston KD & KDH
bulletRotary Piston KT
bulletRotary Piston KTC
bulletRotary Vane KVA
bulletVacuum Boosters KMBD
bulletPD Plus
bulletCompetitor
bulletEqualizer
bulletQx
bulletVacuum Booster MD
bulletBlower Packages
bulletPulsation Dampeners
bulletSanitary Dampener
bulletInlet Stabilizers
bulletSpill Stop
bulletAccumulators
bulletDiaphragm Seals & Valves
bulletCoolant Low Pressure
bulletCoolant High Pressure
bulletChip Lifting Pumps
bulletMiniature Centrifugal
dot
Newsletter

dot
bulletเว็บสำเร็จรูป
bulletจดโดเมนเนม
bulletลงประกาศฟรี
dot
รวมลิงค์เว็บเพื่อนบ้าน
dot


Liquid Ring Single Stage


A Series Single-Stage

A Series Single-Stage

Features
• Simplistic in design, rugged in construction
• Built to run in the most severe of industrial conditions
• Unique design allows pump to operate flooded,
  without damage
• Flat power curve over entire vacuum range prevents motor
  overload
• No contact between operating components in the casing
• Pull down to 29” Hg - 25 Torr (33 mbar a)
• Increased water handling capability prevents heat build-up,
  extends life of single mechanical seal
• Reduced stress on motor shaft and bearings
• Available in stainless steel, bronze, or cast iron (A200 & A300 models available in cast iron)
• Compact, close-coupled design eliminates need for
  interstage manifold or motor alignment

A Series pumps are not as susceptible to cavitation compared to flat plate design because the flow path through the pump is an axial flow. This allows the velocity through the pump to be unchanged and carries the air out effortlessly.
It is not unusual for these pumps to run 24/7 operation for years without maintenance.
A Series pumps are vibration-free and environmentally friendly with no oil used for lubrication, and no oil discharged to atmosphere.
Complete, self-contained systems including liquid recovery and recirculation are available.

Applications:     Vacuum Packaging, Extruders, Solvent Distillation/Vapor Recovery, Sterilization, Degasifiers, Evaporators, Freeze Drying, Vapor Coating, Gas Compression

Specifications: A Series

Inch Hg     15 20 25 27 28  
Model kW RPM M3/hr M3/hr M3/hr M3/hr M3/hr Seal Fluid Required GPM
A5 0.75 2850  15  15

15

13 7 1.5
A10 1.1 2850 21 21 21 18 14 1.5
A15 1.5 2850 32 30 29 25 17 2
A20 2.2 2850 47 49 44 38 27 2
A75 3.7 1450 105 112 105 98 70 2.5
A100 5.5 1450 154 163 148 127 81 2.5
A130 7.5 1450 197 183 170 147 90 3
A200 9.3 960 289 282 255 212 141 5
A300 15 960 416 396 317 282 254 6

 


 

 

 

 

 

 

 

 

 



หน้า 1/1
1
[Go to top]



Copyright © 2015 All Rights Reserved.