ReadyPlanet.com
dot
bulletClamp Metal
bulletClamp Plastic
bulletBolted Metal
bulletBolted Plastic
bulletHigh Pressure
bulletSanitary FDA
bulletSanitary Hygienic
bulletFlap Valve Brahma
bulletSubmersible Stallion
bulletNatural Gas-Operated
bulletE SERIES
bulletCHEMICOR
bulletBIOCOR
bulletFUTUR
bulletAH HIGH PRESSURE
bulletCXM FOR OEM
bulletQuattroflow
bullet811 ANSI Pump
bulletE,F&G Series End Suction
bulletH Series
bulletPlunger Metering
bulletMechanical Diaphragm
bulletHydraulic Diaphragm
bulletProcess Gear Pump
bulletLubricant Gear Pumps
bulletMagnetically Coupled
bulletLiquid Ring Single Stage
bulletLiquid Ring Two Stage
bulletLiquid Ring System
bulletEngineered Solutions
bulletBooster and Piston
bulletDry Screw KDP
bulletDry Screw SDV
bulletRotary Piston KC
bulletRotary Piston KD & KDH
bulletRotary Piston KT
bulletRotary Piston KTC
bulletRotary Vane KVA
bulletVacuum Boosters KMBD
bulletPD Plus
bulletCompetitor
bulletEqualizer
bulletQx
bulletVacuum Booster MD
bulletBlower Packages
bulletPulsation Dampeners
bulletSanitary Dampener
bulletInlet Stabilizers
bulletSpill Stop
bulletAccumulators
bulletDiaphragm Seals & Valves
bulletCoolant Low Pressure
bulletCoolant High Pressure
bulletChip Lifting Pumps
bulletMiniature Centrifugal
dot
Newsletter

dot
bulletเว็บสำเร็จรูป
bulletจดโดเมนเนม
bulletลงประกาศฟรี
dot
รวมลิงค์เว็บเพื่อนบ้าน
dot


Almatec E Series


E-Series Plastic Air-Operated Double Diaphragm Pumps by Almatec

Designed for liquid and slurry transfer in chemical process applications
The Almatec E-Series represents the latest generation of plastic air-operated double diaphragm pumps made in solid design. Compared to the predecessor A-Series the following advantages are especially to mention:

- further increased pump safety due to innovative ring-tightening structure
- increased capacity
- decreased air consumption
- reduced noise level
- optimized flow pattern
- pulsation damper suitable for flange connection

As common, the housing parts are tightened to each other via housing bolts. However, instead of single bolts pressing punctually against the housing, all housing bolts are now tightened against a diaphragm-sized ring per side. This structure results in a more even spreading the housing bolt force and in an increased permissible bolt torque - in the end an increased pump safety which is assisted by further improvements of construction details. 

The flow resistance is reduced via an optimised flow pattern to increase the efficiency factor of the pump. Compared to the A-Series, the same air flow achieves a higher fluid flow, respectively less air flow is required from the same fluid flow. 

The pulsation damper can still be used an integrated model on top of the pump. However, an additional version with flange connection is available. 

For the E-Series pumps are differnet materials available:
- Housing: PE, PE conductive, PTFE, PTFE conductive
- Diaphragms: EPDM, PTFE/EPDM, NBR
- Ball valves: EPDM, PTFE, NBR, stainless steel
- Cylinder valves: PTFE

E-Series pumps made of PE conductive and PTFE conductive meet the ATEX requirements of the directive 94/9/EG.



Almatec E 08 Non-ConductiveE 08 Almatec Pump E Series

Model E 08 (Almatec E Series)
Wetted Housing PTFE, PE Conductive
Diaphragm PTFE
Approx wg PTFE 2 kg
Air Inlet 1/8" BSP (R1/8)
Pump inlet 1/4" Inch FNPT
Pump outlet 1/4" Inch FNPT
Max Size Solids 2 mm
Suction lift dry 0.5 M
Max Flow 15 LPM
Max Drive and OP 7 Bar
Max OPT 100 C

E 10 Almatec Pump E Series ConductiveE 10 Almatec Pump E Series

Model E 10 (Almatec E Series)
Wetted Housing PTFE, PE Conductive
Diaphragm EPDM, PTFE
Approx wg PTFE 5 kg
Air Inlet 1/8" BSP (R1/8)
Pump inlet 3/8" Inch FNPT
Pump outlet 3/8" Inch FNPT
Max Size Solids 3 mm
Suction lift dry 1 M
Max Flow 23 LPM
Max Drive and OP 7 Bar
Max OPT 100 C

 

E 15 (Almatec E Series)E 15 Almatec Pump E Series

Model E 15 (Almatec E Series)
Wetted Housing PE, PE Conductive, PTFE, PTFE Conductive
Diaphragm EPDM, PTFE
Approx wg PE 7 kg
Approx wg PTFE 12 kg
Air Inlet 1/4" BSP (R1/4)
Pump inlet 1/2" Inch FNPT
Pump outlet 1/2" Inch FNPT
Max Size Solids 4 mm
Suction lift dry 2 M
Max Flow 55 LPM
Max Drive and OP 7 Bar
Max OPT PE 70 C
Max OPT PTFE 120 C

E 25 (Almatec E Series)E 25 Almatec Pump E Series

Model E 25 (Almatec E Series)
Wetted Housing PE, PE Conductive, PTFE, PTFE Conductive
Diaphragm EPDM, PTFE
Approx wg PE 15 kg
Approx wg PTFE 29 kg
Air Inlet 1/4" BSP (R1/4)
Pump inlet 1" Inch FNPT
Pump outlet 1" Inch FNPT
Max Size Solids 6 mm
Suction lift dry 3 M
Max Flow 133 LPM
Max Drive and OP 7 Bar
Max OPT PE 70 C
Max OPT PTFE 120 C

E 40 (Almatec E Series)E 40 Almatec Pump E Series

Model E 40 (Almatec E Series)
Wetted Housing PE, PE Conductive, PTFE, PTFE Conductive
Diaphragm EPDM, PTFE
Approx wg PE 34 kg
Approx wg PTFE 69 kg
Air Inlet 1/2" BSP (R1/4)
Pump inlet 1 1/2" Inch FNPT
Pump outlet 1 1/2" Inch FNPT
Max Size Solids 9 mm
Suction lift dry 4 M
Max Flow 333 LPM
Max Drive and OP 7 Bar
Max OPT PE 70 C
Max OPT PTFE 120 C

E 50 (Almatec E Series)E 50 Almatec Pump E Series

Model E 50 (Almatec E Series)
Wetted Housing PE, PE Conductive, PTFE, PTFE Conductive
Diaphragm EPDM, PTFE
Approx wg PE 66 kg
Approx wg PTFE 131 kg
Air Inlet 1/2" BSP (R1/4)
Pump inlet 2" Inch FNPT
Pump outlet 2" Inch FNPT
Max Size Solids 11 mm
Suction lift dry 4 M
Max Flow 583 LPM
Max Drive and OP 7 Bar
Max OPT PE 70 C
Max OPT PTFE 120 C

หน้า 1/1
1
[Go to top]



Copyright © 2015 All Rights Reserved.